Make a Better Paper Airplane Activity

4.0 based on 60 ratings
Updated on May 13, 2014

What kid hasn’t spent some part of some class at some point during his life making a paper airplane when he should have been doing something else? Why not turn this common time killer into a lesson on the physics of aerodynamics and flight? This is a great activity for students of all ages, but older students should have a greater understanding of fluid dynamics and be able to push the outer limits of paper airplane design!

What You Need:

• Various types of paper (any paper around the house is fine, but try to locate papers with different weights and thicknesses)
• Stopwatch
• Possible other materials include paper clips, stapler, scissors, and glue as needed by design

What You Do:

1. Brainstorm ideas with your kid about what makes a good paper airplane. Talk about the different variables that can be changed (type of paper, folding pattern, other materials used) and how each of these may influence the flight of the plane. Physics concepts to consider:
• Archimedes’ Principle – “An object surrounded by air is buoyed up by a force equal to the weight of the air displaced.” If your budding Orville Wright uses heavier materials in his plane construction, he needs to take into account that more air must be displaced in order to keep the plane aloft. He should consider compensating with a broader wing span.
• Bernoulli’s Principle – “When the speed of a fluid increases, pressure in the fluid decreases”. In this case, the fluid is air. In order for a plane to stay airborne, there must be less pressure above the wing then below it. This allows the greater bottom pressure to exert an upward force on the wing, giving the plane lift. In order to accomplish this, wings tend to have a greater surface area on the tops than the bottoms. Picture the curved, slightly upturned, top of a wing. Now, as the plane moves through the air, wind must travel faster over the curved top of the wing than the flat bottom of the wing, providing lift.
• Air Resistance – Friction causes drag, an opposing force to the forward motion of the plane. In order to decrease air resistance, your child should consider an aerodynamic design that allows the plane to “slice” through the air. Possible design accommodations should include a pointed nose and smooth body.
2. Gather the materials and each of you make an airplane that you think will stay airborne the longest.
3. Let the competition begin! Either head outside on a calm day or find a large enough space to fly your planes indoors. Each person should take a few practice throws, then take turns having one person fly his plane while the other person times the flight. See whose plane stays airborne for the longest time!
4. Discuss the differences between your planes and why the winning plane flew longer than the other plane. Consider hitting the drawing board with new designs for a rematch! There are loads of sites on the Internet with various paper airplane designs. Consider visiting a few and seeing how their designs compare to the designs used by your child.
5. Turn up the heat on the competition and change the goal! Who can design the best trick airplane? Highest flying? Fastest?
Lori Stewart is a freelancer specializing in the development of science education materials. As a high school science teacher, Lori had several students place first and second in NASA's Student Involvement Program national competition.