Learning Library
Who we are
Guidance

Slow Burn

(19 ratings )

Research Questions

• What causes a candle to burn?
• Does temperature affect the way a candle burns?

Candles were used to provide light in the darkness long before electricity was discovered. Today candles are still used for enjoyment and in emergency situations. Candles are made of different types of wax including paraffin, soy, bee, plant, or animal fat. The wax in a candle provides the fuel to keep the candle burning. When the wick, an absorbent piece of string is lit, the heat from the fire melts the wax. The liquid wax moves up the wick releasing a vapor that burns. The wax vapor also coats the wick, keeping it from burning.

Materials:

• 6 taper candles (candles must be the same in size, color, and manufacturer)
• 6 candle holders
• paperclip
• ruler
• matches or lighter
• timer
• thermometer
• small closed room with air-conditioning
• space heater
• paper
• pencil

Experimental Procedure

1. Gather the necessary materials.
2. Turn on the air-conditioner in a small room that can be closed up. Place the thermometer in the room. Allow the room to cool to a temperature of about 60 to 65 degrees Fahrenheit.
3. Using a paperclip, scratch a label at the bottom of each candle – C1, C2, C3 for the cold room candles and W1, W2, W3 for the warm room candles. Measure the length of the candles and record.
4. Set three candles upright in the room and have an adult light each candle. Allow the candles to burn for 30 minutes. At the end of 30 minutes, blow the candles out and measure each of the candles’ lengths and record.
5. Subtract the difference between the original candle length and its length after burning for 30 minutes. Record the difference. Find the average length burned by adding the burned lengths of the three candles and dividing by three.
6. Turn the air-conditioner off in the room. Turn the heater on and turn on the space heater. Heat the room to a temperature of about 80 degrees Fahrenheit.
7. Set the remaining three candles upright in the room and have an adult light each candle. Allow the candles to burn for 30 minutes. At the end of 30 minutes, blow the candles out and measure each of the candles’ lengths and record.
8. Again, subtract the difference between the original candle length and its length after burning in a warm room for 30 minutes. Record the differences. Find the average length burned by adding the burned lengths of the three candles and dividing by three.
9. Analyze the results and draw a conclusion.

Terms/Concepts: wick: a band of woven fibers like a string that supplies fuel to a candle by capillary action capillary: a fine hole or passage paraffin: a flammable, waxy substance used to make candles; Light from the candle comes from a chemical reaction caused by setting fire to the wick. The heat travels from the wick to the wax. The wax turns into a hot liquid that then travels up the wick. The candle continues to draw hot vapors from the wick allowing it to continue to burn.

References:

“How Does a Candle Work?” http://home.howstuffworks.com/question267.htm “Candles” at http://www.explainthatstuff.com/candles.html “The Science of Candles” at http://www.candles.org/candlescience.html

Disclaimer and Safety Precautions

Education.com provides the Science Fair Project Ideas for informational purposes only. Education.com does not make any guarantee or representation regarding the Science Fair Project Ideas and is not responsible or liable for any loss or damage, directly or indirectly, caused by your use of such information. By accessing the Science Fair Project Ideas, you waive and renounce any claims against Education.com that arise thereof. In addition, your access to Education.com's website and Science Fair Project Ideas is covered by Education.com's Privacy Policy and site Terms of Use, which include limitations on Education.com's liability.

Warning is hereby given that not all Project Ideas are appropriate for all individuals or in all circumstances. Implementation of any Science Project Idea should be undertaken only in appropriate settings and with appropriate parental or other supervision. Reading and following the safety precautions of all materials used in a project is the sole responsibility of each individual. For further information, consult your state's handbook of Science Safety.

What could we do to improve Education.com?